How to remove tint from the car window quickly

  1. What is required for this
  2. How to remove a tint film?
  3. Removing the tint film from the rear window
  4. How to remove glue residue
  5. What to use instead of tinting

Tinting film among many drivers has earned a reputation as a convenient means of protecting the interior from overheating in the summertime, burning out in direct sunlight and prying eyes. But if it was glued poorly or because of it, the light transmission ability of the front side and windshield ceased to meet the standards of GOST, it may be necessary to remove it. Owners who are interested in how to remove the tint from the glass of the car quickly, should take into account a number of useful recommendations.

What is required for this

  • A razor blade, in the absence of which you can use a regular stationery knife.
  • Glass cleaner. In this case, almost any composition will do, but it is better to refuse the cheapest options.
  • Hard sponge. For example, the kitchen. But she should not have metal lint.

Tinting film among many drivers has earned a reputation as a convenient means of protecting the interior from overheating in the summertime, burning out in direct sunlight and prying eyes

How to remove a tint film?

To do this, pry it, directing the edge of a razor or other blade to the glass at a sufficiently sharp angle so as not to scratch it. Then it is necessary to tint the fingers, first with one and then with both hands, applying a force evenly so that it does not tear. With a certain luck, the canvas will lag behind entirely. After that, you only need to remove the remnants of the adhesive composition with a sponge dipped in a fresh detergent solution.

But often the drivers are faced with the fact that the old film is easily pulled away from the edges, but as it approaches the center it begins to break. In this case, one cannot do without a building or household hair dryer and a second person who will help to carry out this procedure.

Assistant to warm the glass outside the car to a temperature of about 40 degrees. With significant overheating, it may burst, and the film will melt and stretch. While the assistant will gradually warm up the workspace, you will need to tighten the softened tint film. After working with a hairdryer, it is necessary to remove the remains of glue in the shortest possible time, until he has time to harden and collect dust on himself.

Removing the tint film from the rear window

If you have heating threads on it, you cannot do without using a hair dryer. A knife or razor blade can cut one or more filaments, after which you will need to restore them or purchase a new glass. After repair of the heating system with conductive glue, its appearance may cause complaints.

It is important to pull the film slowly, evenly, so as not to damage the threads. Before you quickly remove the tint from the glass of the car, you need to take care of finding a place for this procedure. It is necessary to soften the film with the help of a hair dryer evenly and only at a positive temperature. Otherwise, the glass may suddenly crack. If the work is done in winter, it’s better to use a warm enough garage, giving the car time to equalize the temperature of the glass after a cold street.

If the work is done in winter, it’s better to use a warm enough garage, giving the car time to equalize the temperature of the glass after a cold street

How to remove glue residue

Often this does not require special efforts. After rubbing with a sponge soaked in soapy water, it is collected in the pellets and easily falls off. But if the film was glued with extremely strong glue, its removal will cause a lot of trouble.

Relatively “gentle” glue can be scrubbed with alcohol, G154 or another glass cleaner from the nearest car store.

In extreme cases, you will need to use a solvent. Before that, you must carefully cover the rubber seals, trim and seats. Clean the glass with a solvent in a well-ventilated area. After its use in the cabin for a long time there will be an unpleasant smell.

What to use instead of tinting

The film attracts drivers with the ability to protect their eyes from shiny snow and sunlight, to quickly heat the passenger compartment and to quickly burn out the surfaces of the upholstery. The last argument for most modern cars is not relevant, as manufacturers supply them with glasses containing iron oxide, capable of reflecting the infrared spectrum of light. And athermal film can be used to protect heavily used cars.

Avoid sun glare is better with the help of special sunglasses. In addition, at dusk, they can be removed so as not to "blind" at night in a tightly tinted car.

How to remove a tint film?